The Ford Explorer is an ideal car to put in a sunroof in. Able to holding a sunroof as much as 22 inches broad and forty two inches lengthy, the Ford Explorer requires particular instruments and precise chopping to install. Using a top quality sunroof for this undertaking makes the installation nearly as good as a manufacturing unit sunroof for a lot much less money.
Ford Explorer SunRoof Installation Instructions
1. Put together the work space by laying out all of tools and sunroof components for straightforward access. Push the seats of the Explorer all the way back and cover the inside with a sheet or tarp.
2. Maintain the shade tray up to the roof interior and ensure there’s at the very least 4 inches of clearance on each side. Push a screwdriver by way of the headliner at every nook, making a small dent within the steel roof.
3. Tape the template to the roof, utilizing the dents as a guide and take away the headliner. Drill a starter gap by means of one of many dimples and lower the roof out with metallic shears, following the template carefully.
4. Clean the edges of the opening with a file and take a look at fit the sunroof’s frame. Make any mandatory adjustments and coat the naked metallic with primer to inhibit rust.
5. Clean the bottom of the sunroof and run a bead of sealant around the lip. Set the sunroof body in place and connect the clamping ring and screws taking care to not overtighten or strip the screws.
6. Wipe any extra sealant with a rag and assemble the remainder of the sunroof per the sunroof manual. Change the Explorer’s headliner using a razor knife to make alterations and clear the new glass.